| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Type: | Grain |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. When using a hardness tester to measure the hardness of feed and grain, place the pelleted feed radially on the fixture.
2. When the working button is continuously pressed, the tension of the spring is gradually increased by the lead screw until the pellet feed is crushed. 3. The maximum pressure when the particle is crushed can be transmitted to the single-chip microcomputer through the sensor, and the single-chip microcomputer will display its hardness value after conversion, which is the hardness of the particle, and the unit is kg.
4. From the feed pellet sample, randomly select 10 pellets and measure them according to the above method. The average value of the hardness value is the particle hardness of the sample.
5. Generally measure twice, and compare whether the results of the two measurements are consistent.
|
model
|
parameter difference
|
|
GWJ-1
|
Manual reset, grain and feed can be measured, digital display, manual force, unit: kg. Maximum load value: 20kg/196N. Load graduation value: 0.01kg/0.1N. Measurement accuracy: ±2%
|
|
GWJ-2
|
Automatic reset, grain and feed can be measured, digital display, manual force, unit: kg. Maximum load value: 20kg. Maximum diameter: 18mm. Measurement accuracy: ±0.5%. Resolution: 0.1kg
|
1. Are you a manufacturer or not?
Yes, we are. We have more than 300 workers and 26680 square meters of production base in Zhejiang province which is close to Shanghai and Ningbo port. Welcome to come and visit our factory.
){kind=link}